Film adhesive for airtight connections of vapour retarders and vapour barriers to masonry, also adheres to delicate substrates such as PE, PP, PA; freeze-resistant and self-adhesive
for bonding and sealing between vapour retarders / barriers and masonry acc. to DIN 4108-7 / SIA 180
for airtight and windtight bonding and sealing of diffusion-tight and vapour diffusion-open window tapes (foil tapes) in door and window construction, such as «Wikofix-FBA window tape OUTSIDE» or «Wikofix-FBI window tape INSIDE»
due to the immediate adhesion to almost all absorbent substrates commonly used in construction, countless other sealing bonds and special works can also be realised; in particular those in accordance with the Energy Saving Ordinance EnEV 2016 (German standards)
also for double-sided bonding of non‑absorbent substrates by means of the contact bonding method (steam breaks etc.)
suitable for the interior zone and in outdoor areas protected from humidity / moisture
ideal for building envelope, new building / construction, renovation construction, window manufacture, handicraft and industry
Product benefits:
achieves the required airtight connections / terminations of the building envelope
for a vapour barrier adhesive ist achieved an unusually high level of bond strength (holding at 1000 Pa, hurricane force).
fulfils the requirements according to DIN 4108-11 (thermal insulation and energy conservation in buildings - Part 11: Minimum requirements for the durability of bonded joints using adhesive tapes and adhesives for the construction of airtight layers)
outstanding adhesion to most substrates
good adhesion to poorly adhering substrates like polyethylene (PE), polypropylene (PP) or polyamide (PA), non-woven and many types of rubber
does not become brittle; remains permanently plastoelastic after it has dried
accelerated curing
high initial adhesion; adhesion is continuously increased during the drying process, lightweight parts require no fixing or support
can be used without a pressure bar for joints in new build and refurbishment projects (acc. to DIN 4108‑7)
despite immediate adhesion, remains adjustable for some time after bonding
non-dripping
has a filling effect and eliminates irregularities
coating thickness
almost odourless
good ageing resistance
pH-neutral, corrosion-resistant
frost resistant until -30 °C, can withstand the cold of a winter night in an assembly vehicle without damage
Deutsch
Français
Italiano