CG-MP 18 battery gun

strong version for 600 ml tubular bags and 310 ml cartridges

• for tubular bags with standard filling volume: 600 ml
• convertible to 310ml 1-component standard cartridges using the included conversion kit
• very high pressure output, stepless speed adjustment, rapid pressure relief
• max. squeezing force: 6500 N
• feed speed up to 12.5 mm/s
• overload protection with audio signal
• ideal as a personal work tool for daily use
• plastic housing, barrel made of aluminium
• incl. cartridge holder made of sturdy and lightweight plastic and shorter squeeze rod for cartridges
• for products with low to very high viscosity (adhesives and sealants)
• drive: battery (accumulator)
• weight: ca. 2100 g
• incl. sturdy polyamide work case, charger, 2 batteries (18 V, 2Ah, charging time approx. 1 h and discharge protection) as and further accessories 

Profi-cartridge gun GREEN

with steplessly adjustable power transmission from 12:1 to 25:1

• for 1K standard cartridges with standard filling volume: 290 - 310 ml
• power transmission: from 12:1 up to 25:1 (adjustable with stepless control knob)
• for products with low to very high viscosity
• soft handle with optimised ergonomics
• fully hardened rod
• powerful version with max. squeezing force: 6000 N
• rotatable
• manual piston relief
• made of aluminum and steel
• for bead application
• drive: manual
• weight: ca. 843 g

Wisacoll HPK 601

Liquid 1-component hybrid assembly adhesive with D4 water resistance, hard and weather-resistant; ideal for wood-based materials, colour: beige

• in the entire construction, assembly and industrial sector
• in window and door construction
• for board joint gluing of cassettes in the wood, window and front door sector
• in the floor area (stair treads, skirting boards, laminate installation)
• suitable for repairing wooden surfaces indoors and outdoors
• ideal for carpenters, timber construction, stair construction, window manufacture, garages, handicraft and industry

• no labelling obligation
• extremely high final strength, stronger than wood
• waterproof, achieves stress group D4 for wood / wood bonding in accordance with EN 204
• neither shrinkage nor foaming (no rectification necessary)
• compatible with natural stone
• solvent-free (VOC emission class A+)
• almost odourless
• EU: No training obligation (isocyanate free)
• silicone free
• good processing viscosity (easy to spread)
• sandable when cured
• recoatable, lacquerable
• for indoor and outdoor use
• no risk of corrosion
• good UV, weather and ageing resistance
• above-average hardness for hybrid adhesives
• above-average tensile strength and tensile shear strength
• low consumption (is pressed down to «0»)
• cost-saving, as no minimum layer thickness is required
• good adhesion to the majority of substrates used in the construction industry, even those that are slightly damp like wood-based materials, mansory (bricking), metals, aluminium, natural stone, many plastics etc.
• for indoor and outdoor use

Wisacoll HPK 602

Pasty 1-component hybrid assembly adhesive with D4 water resistance, hard and weather-resistant; ideal for wood-based materials, color: beige

• in the entire construction, assembly and industrial sector, specifically for use indoors and for smaller parts in outdoor areas
• in window and door construction
• for board joint gluing of cassettes in the wood, window and front door sector
• for skirting boards and laminate installation
• for the attachment of supports for raised access floors
• for fixing signs, stair railing rods and dowels in masonry
• for bonding corner joints in aluminium window and door construction in aluminium window and door construction
• in the floor area (stair treads, skirting boards, laminate installation)
• suitable for filling and levelling wood, masonry, drill holes indoors and outdoors
• ideal for carpenters, timber construction, stair construction, metal construction, handicraft and industry

• no labelling obligation
• waterproof, achieves stress group D4 for wood / wood bonding in accordance with EN 204
• extremely high final strength, stronger than wood
• above-average hardness for hybrid adhesives
• above-average tensile strength and tensile shear strength
• neither shrinkage nor foaming (no rectification necessary)
• short pressing times
• solvent-free (VOC emission class A+)
• compatible with natural stone
• almost odourless
• EU: No training obligation (isocyanate free)
• silicone free
• well gap filling up to 2 mm (max. possible up to 4 mm)
• good processing viscosity (easy to spread)
• thixotrope, non-dripping
• sandable when cured
• recoatable, lacquerable
• for indoor and outdoor use
• no risk of corrosion
• good UV, weather and ageing resistance
• low consumption (is pressed down to «0»)
• cost-saving, as no minimum layer thickness is required
• easy to squeeze out of cartridges
• good adhesion to the majority of substrates used in the construction industry, even those that are slightly damp like wood-based materials, mansory (bricking), metals, aluminium, natural stone, many plastics etc.
• non-foaming, low shrinkage
• for indoor and outdoor use

Wisacoll SMP 788

Tough-elastic hybrid polymer adhesive with high initial and final adhesion; immediate tack, sandable and paintable

• across the construction and industrial sectors
• ideal for handicraft, assemblers, timber construction, carpenters, metal construction specialists, plumbers, industry etc.

• excellent value for money
• available in 600 ml tubular bag
• extremely high initial adhesion
• there is normally no need for fixing or support
• good adhesion to most, even slightly damp substrates
• tough yet elastic plastic
• paintable / recoatable, lacquerable
• solvent-free (VOC-free)
• very low-emission
• almost odourless
• no risk of corrosion
• non-foaming, free of shrinkage and bubbles
• humidity resistant
• for indoor and outdoor use

Wisacoll WL 530

High-quality D3 white glue for all types of wood, parquet and window construction

• window and door construction, especially for gluing the corner joints of window and door frames (slot and tenon bonding)
• surface gluing of HPL,  MDF and plywood boards
• surface gluing in the production of partition walls and elements
• gluing of laminate panels
• finger joint bonding
• stair construction and parquet flooring
• hardwoods and exotic woods
• paper and cardboard craftwork
• suitable for the interior zone and in outdoor areas protected from moisture 

• outstanding proccessing
• humidity resistant acc. to cat. D3 acc. to EN 204
• high mechanical strenght properties
• transparent (when dry)
• sandable
• recoatable
• water-based
• no labelling obligation
• solvent-free (VOC-free)
• almost odourless
• for indoor and outdoor use (without direct exposure to weathering)
• suitable for cold, hot and high-frequency gluing

Wisacoll WS 1250

Contact and surface adhesive for delicate substrates, solvent-free

• ideally suited for large-area bonding of EPDM, PVC, ABS and other plastics to all types of building materials, especially wood fibre boards and plywood panels
• optimally, at least one of the adhesive surfaces is porous (absorbent)
• also for double-sided bonding of non‑absorbent substrates by means of the contact bonding method
• suitable for the interior zone and in outdoor areas protected from moisture
• ideal for interior finishing, handicraft and industry

• outstanding adhesion to most substrates
• good adhesion to poorly adhering substrates like polyethylene (PE), polypropylene (PP) or polyamide (PA), non-woven and many types of rubber, in particular EPDM
• does not become brittle; remains permanently plastoelastic after it has dried
• bridges minor unevennesses
• no labelling obligation (includes biocides for self-protection)
• water-based
• solvent-free (VOC-free)
• plasticizer-free
• almost odourless

Wisatyp HPB 75

Transparent, solvent-free coating for mineral substrates based on silane-terminated polymers

• for the impregnation and dirt-repellent coating of mineral substrates like e.g. polished and unpolished concrete floors, floor screed, plastering, setts, clinker, floor, walls, ceilings, natural stone, wood-based materials, gypsum fibreboards etc.
• imparts a high degree of dirt repellency to substrates, both as an impregnating agent and as a coating (e.g. against coffee, tea, ketchup, orange juice, ink, red wine, household and machine oils, etc.)

• liquid, paintable
• very efficient (100 % solids content)
• has good depth effect
• anhydrous and solvent-free
• solidifies the substrate
• makes the surface hard and closes the cells
• film forming high barrier effect
• no labelling obligation
• no sticking to surface
• excellent water resistance
• resistant to common cleaning agents
• heat resistant and fire-retardant
• sandable, polishable (after complete hardening)
• for indoor and outdoor use

Wisatyp V-50

Transparent, liquid, water- and solvent-free waterproofing, coating and adhesive based on silane-terminated polymers

• balconies, terraces and roofs
• drains, shower trays
• flower boxes, skylights, chimneys
• surfaces that are subsequently buried in the ground
• restoration and repair of damaged floors (e.g. crack repair) and other building materials
• to protect and extend the service life of many materials
• ideal for porous and mineral substrates like e.g. polished and unpolished concrete floors, floor screed, natural stone, setts,  plastering, clinker, brick, floor, walls, ceilings, wood-based materials, gypsum fibreboards, glass etc.
• also very suitable many non-absorbent substrates like e.g. metals, EPDM

• clear-transparent
• liquid, paintable
• high quality
• good UV, weather and ageing resistance
• outstandingly water-resistant and waterproof
• compatible with natural stone
• ready for immediate use, easy processing
• good adhesion on most, even wet, surfaces
• very efficient and full-bodied (100 % solids content)
• shrinkage-free, non-foaming
• can be walked on
• almost odourless
• anhydrous and solvent-free
• isocyanate free and silicone free
• solidifies the substrate
• makes the surface hard and closes the cells
• film forming, high barrier effect
• no sticking to surface
• resistant to common cleaning agents
• sandable and recoatable (after complete hardening)
• for indoor and outdoor use